Skip to Content

Products to mechanical load

Products

DDT: Test rig for durability testing of doors

Test rig and mountings for long life reliability testing of doors. Doors with or without handles can be tested as well as doors with a panic bar as an additional attachment.br> The DDT module is controlled by a multiline display with soft keys. The planned cycles and actual figures as well as operating signals and error indicators are displayed on the control unit.br> The system works with two inductive proximity switches to indicate a closed/open door and a pushed handle. The operating unit is made of a door-activating cylinder and a special device, which pushes the door handle with a prede...

DQZ: Long-term transverse tensile test rig with temperature load

-

DDB: Durable test rig for single axis hinges

Test rig and mountings for a long life testing of single axis hinges. Windows as well as French windows hinges can be tested for different classifications. This module consists of a stable frame, a leaf with a mechanical attachment for test weights, a velocity and angle adjustable pneumatic cylinder for opening and closing the leaf, as well as three lowering measurement thorns and a Siemens LOGO! control unit. The parameters according to the test classification can be entered to the control unit. According to the standard the measures can be taken after prescribed cycles. There is the poss...

LWW-PROFI: Test rig for joint permeability, water tightness and wind loads

Test rig and accessories to the determination of joint permeability, water tightness and wind load behavior at windows, doors and facades. Sealings, panels and other outside wall components can be checked for the above characteristics as well. As standard, measuring units and care units with a volume flow of 100 m³/h, 450 m³/h or 800 m³/h are available.The volume flow is already converted in norm conditions. The testing pressure can be regulated up to 5000 Pa or 15000 Pa. The hydraulic pressure and flow rate can be set by hand or electrically and recorded by a measuring turbine. All measurin...

LWW-ECO: Test rig for joint permeability, water tightness and wind loads

The test rig determines the permeability of joints, water tightness and the resistance to wind load on windows, French windows and facades. Besides sealing, panels and other exterior wall parts are tested on these characteristics as well. As standard, measuring units and care units with a volume flow rate of 100 m³/h, 450 m³/h or 800 m³/h are available. The volume flow rate is already converted in standard conditions. The testing pressure can be regulated up to 2500 Pa. All measuring values are collected and visualized by an integrated computer. The clamping substructures are equipped in diff...

MPA-AX: Axe test rig

-

HMG-300: Hand measuring device

Depending on the type version, this mobile compact measuring device measures velocity, force, and torque.The HMG 300 has a 3.2 inch command touch screen and an USB-port. This USB-port is used for data exchange with a PC as well as for charging the lithium-ion-battery. You can choose from the following sensors and connect them with the multifunction meter HMG 300, for checking the required feature: Velocity The velocity measure is especially designed for measuring of the opening and closing velocity of windows and doors during a durability test. Force The force measure is primarily designed f...

ZPM-E: Electromechanical tension and compression test rig

Test rig and mountings for tension and compression testing for different types of glasses. The test rig is made of a solid coated metal frame. An electromechanical servo axis is installed in the center. Those raises controlled force loads to the specimen. The compressing indenter attachment and the bearing are made of an Ø 50 mm steel shaft, coated with rubber, and inserted in high performance slide bearings. Operating is force controlled. There are three different indenters to choose from: G: Glass (single-pane and toughened safety glass) SG: Shipbuilding and marine structures E: W...

MEA: Clamping field burglary/mechanical durability

-

MED: Burglary tool

-

MPK-HS: Hard impacting unit

-

KBP-HF: High humidity test rig

-

MPA-K: Deflection equipment foldable

-

DDD: Test rig for durability testing of lever handles

Test rig and mountings for long life testing of lever handles and knob furniture. With this DDD module the durable operating of lever handles and knob furniture is simulated and evaluated. There is the possibility to test different door push button systems for their long-term functionality and to evaluate the results afterwards. As a specific feature of this test rig the high flexibility of the push button test is called by the wood test block and the variable setting of the implementation frequency.

DDSB: Test rig for durability testing of locks, latches, and emergency exit devices

Test rig and mountings for a long life testing of locks, latches, and emergency exit devices. Various lock systems are tested for different classifications in a durability test. This test rig consists of a stable screwed frame and two test doors, which are mounted axial and radial bearings to ensure rigidity according to the standard. In addition, we deliver test weights meeting the standard and a closing device with deflection roller and the required weights. Another component of the DDSB module is the control unit. This control unit operates the pressure and the durability function. It is c...

MPK-DR: Pendulum wheel (dual wheel)

Test equipment for tests according to DIN EN 12600 and DIN EN 1629 dual wheel 50 kg including fixing rope.

ZPM-U: Universal bending and tension machine

Test rig and accessories for tension and compression testing for single-plane safety glass or ship/marine glass. The test rig is made of a solid coated metal frame. A hydraulic servo axis is installed in the center. Those raises controlled force loads to the specimen. The compressing indenter attachment and the bearing are made of an Ø 50 mm steel shaft, coated with rubber, and inserted in high performance slide bearings. G: Glass (single-pane and toughened safety glass) SG: Shipbuilding and marine structures E: Welded corner and T-joint The measurement occurs by a protected measuring sy...

ZPM-E ECO: Corner failure testing machine for FPC

This testing machine with accessories allows the check and determination of the breaking force of welded corners and T-connections. Therefore, this testing machine is suitable for bending and pressure tests on window corners according to standard EN 514 for further tests on windows. The main elements of the corner break testing machine are the stable case with closeable door, the hydraulic cylinder with analog/digital force display and the trolley with rockers elements.

MRT: Racking and Torsion

Adaptive unit and accessories for the testing of mechanical strain. With the combination of a clamping field vertical loads and resistances can be checked against torsions to windows, window doors and hardware. The test rig consists of a stable stainless steel construction, a massive steel chassis and a system with adaptive and individually adjustable screw connections and assembly attachments that allow a testing of different window and door constructions (Turn, Tilt, Turn-Tilt, top-hung, swing, pivot, swing and sliding function).

MPA-S: Pendulum device for stationary use

Test equipment for tests according to DIN EN 12600 and DIN EN 1629 Rigid construction with rollers and lift truck fishplates For the attack vertical adjustment by means of lift truck Manual activation incl. hand winch to the drop height setting Colour coating as standard in grey colour RAL 7035 (without impactor).

MPA-I: Deflection device integrated

Test equipment for tests according to DIN EN 12600 and DIN EN 1629 Complete pendulum equipment to the combination with clamping fields MEA incl. electromotive unit to the deflection of the impactor incl. electromotive unit to the vertical orientation of the whole pendulum equipment Colour coating as standard in grey colour RAL 7035 (without impactor)

DDKS-P: Pneumatic test rig for durability testing of windows and doors

Test rig and mountings for long life testing of windows and French windows. Turn/swivel as well as tilt function and simple sliding operation can be tested with this module. The control module is an operating device using a touch display for visualization. It also enables separate operation of two drive units. The delivery includes four velocity sensors for controlled and measured opening and closing. The main components of this test rig are a clamping surface, a control cabinet as well as four velocity sensors. With the turn and tilt drive unit windows and French windows are tested up to a wid...

DDKS-S: Servoelectric durability test rig for windows and doors

Test rig and accessories for testing mechanical long-term durability on windows and doors. The device offers the option to test turn-tile, lift-slide and lift-slide-tilt windows right up to parallel slide-tilt doors, freely actuated or forcibly actuated according to the specified standards. The test program is taught-in freely via a joystick control element into the supplied PC (teach-in procedure).

Stark genug?

  • Einbruchprüfstände: Aufspannfeld

  • Glasbelastungsprüfstände: Kugelfall, Axt, Biegebruch


In order to optimize our website for you and to be able to continuously improve it, we use cookies. By continuing to use our services, you agree to the use of cookies. Further information on cookies can be found in our privacy policy.