ift Model EPD
Subject
Environmental Product Declarations (EPDs) make statements regarding the environmental impact and/or the environmental effects of a product, e. g. the energy consumption, the existing greenhouse gas (CO2 ) or the water consumption. These documents serve basically as proof for building certification. That is , if buildings are certified by sustainability systems as e.g. DGNB (German Association for Sustainable Building) or BNB (evaluation system for sustainable building), EPDs are necessary among other things.
The online application ‘create model EPDs’ enables the simple and cost-effective compilation of an EPD for aluminum windows, uPVC windows and timber windows. EPDs are generated automatically on basis of model EPDs upon confirmation of different framework conditions.
For model EPDS, data of different companies are determined that are used as average values in a common ‘data pool’. They state a sector average and guarantee in this way that the EPDs are suitable for most manufacturer. In a model EPD, no specific qualities of the building product can be highlighted that are suitable for the differentiation in competition.
The basics werde developed in a publicly supported research project. This project was supported and promoted by the involved associations QKE e.V., VFF e.V., FV S+B e.V. and BF e.V. as well as the Research initiative ‘Future Building’ of the Federal Ministry of Transport, Building and Urban Development (BBSR) (reference: SF – 10.08.18.7-09.21/II3-F20-09-1-067). Research centers were ift Rosenheim, Institut Bauen und Umwelt e.V. as well as PE International AG.
The model EPD describes the significant environmental effects of a building product. The life cycle assessment is calculated by the life cycle ‘Cradle to Grave’ taking into additional consideration all preceding chaings, e.g. raw material extraction. Furthermore, the stage ‘End of Live’ is considered. Basis for the model EPDs are the corresponding Product Category Rules (PCR) according to DIN EN ISO 14025 and prEN 15804 as well as the ift- Guideline NA-01/1 ‘General guideline for elaboration of type III Environmental Product Declarations’.
The online application ‘create model EPDs’ enables the simple and cost-effective compilation of an EPD for aluminum windows, uPVC windows and timber windows. EPDs are generated automatically on basis of model EPDs upon confirmation of different framework conditions.
For model EPDS, data of different companies are determined that are used as average values in a common ‘data pool’. They state a sector average and guarantee in this way that the EPDs are suitable for most manufacturer. In a model EPD, no specific qualities of the building product can be highlighted that are suitable for the differentiation in competition.
The basics werde developed in a publicly supported research project. This project was supported and promoted by the involved associations QKE e.V., VFF e.V., FV S+B e.V. and BF e.V. as well as the Research initiative ‘Future Building’ of the Federal Ministry of Transport, Building and Urban Development (BBSR) (reference: SF – 10.08.18.7-09.21/II3-F20-09-1-067). Research centers were ift Rosenheim, Institut Bauen und Umwelt e.V. as well as PE International AG.
The model EPD describes the significant environmental effects of a building product. The life cycle assessment is calculated by the life cycle ‘Cradle to Grave’ taking into additional consideration all preceding chaings, e.g. raw material extraction. Furthermore, the stage ‘End of Live’ is considered. Basis for the model EPDs are the corresponding Product Category Rules (PCR) according to DIN EN ISO 14025 and prEN 15804 as well as the ift- Guideline NA-01/1 ‘General guideline for elaboration of type III Environmental Product Declarations’.
Contractual preconditions, contractual basis, conclusion of contract and prices
Condition for the compilation of an EPD on basis of a model EPD is the free registration of the user on
www.ift-service.de as well as the full compliance of the terms of use for the compilation of model EPDs.
The following documents are necessary for the compilation of an EPD:
www.ift-service.de as well as the full compliance of the terms of use for the compilation of model EPDs.
The following documents are necessary for the compilation of an EPD:
- Company logo (format: PNG, JPG or GIF, RGB mode, diimensions: max. B x H = 500 x 300 pixel, data size: max. 500 kb
- for members: ift or VFF membership number
The compilation of an EPD subject to a charge. The price for ift and VFF members is € 407.00. Without membership, the compilationof an EPD costs € 613.00 (in each case plus value added tax of 19%).
The EPD will be sumitted to the user only upon receipt of the payment of the supplier.
Area of application and period of validity
The verified Environmental Product Declaration is only valid for the products named in the declaration and is valid for 5 years of the creation date.
Consent to the publication of the issued EPD
All EPDs issued by ift Rosenheim are published on www.ift-service.de at ‘Show issued EPDs’. An anonymisation does not take place. The user agrees to the publication with the sending of the online order.
Suggestions and advice regarding improvement of the model EPDs can be sent via email to nachhaltigkeit@ift-rosenheim.de with subject ‘Model EPDs’.
Suggestions and advice regarding improvement of the model EPDs can be sent via email to nachhaltigkeit@ift-rosenheim.de with subject ‘Model EPDs’.
Contact
ift Rosenheim
Sustainability
nachhaltigkeit@ift-rosenheim.de +49 8031 261-0 +49 8031 261-290Order model EPDs
The following model EPDs are currently not available to order online, therefore, please click on the EPD relevant to you to get an order form to order your model EPD.
The following model EPDs can be order currently via the order form:
The following model EPDs can be order currently via the order form:
- EPD Flat glass, toughened safety glass and laminated safety glass
- EPD Insulating glass units
- EPD doors / systems made of wood and wood-based materials (German only)
- EPD roller shutters and rolling grilles
- EPD sectional doors
- EPD steel doors, gates and flaps of the Schröder system (German only)
- EPD windows and lift and slide elements made of steel, stainless steel and weatherproof steel
- EPD facades made of steel, stainless steel and weatherproof steel
- EPD doors and fire resistant doors made of steel, stainless steel and weatherproof steel
- EPD electric drives and pneumatic cylinders
-
EPD electrical control units and pneumatic valves / alert stations
The order forms and model EPDs can also be requested in other languages
Please contact us by mail to nachhaltigkeit@ift-rosenheim.de.